
Low-Force Stereolithography Printer
Low-Force Stereolithography 3D printing uses a flexible tank and linear illumination to deliver incredible surface quality and print accuracy. Within the LPU, a galvanometer positions the high-density laser beam in the y-direction, passes it through a spatial filter, and directs it to a fold mirror and parabolic mirror to consistently deliver the beam perpendicular to the build plane. The Form 3 offers a x-y resolution of 25 μm and layer thickness up to 25 μm.

Raise N2 Plus
Dual Extruder 3D Printer
The Raise3D N2 Plus offers a dual extruder system with closed frame, a Wifi connection and a large 7″ color touchscreen. With its heated print bed and high temperature nozzle (up to 300 °C), the Raise3D N2 Plus can 3D print a large variety of 3D filaments. The Raise3D N2 Plus has a very large build volume of 305 x 305 x 610 mm.

Form 2
Stereolithography Printer
The Formlabs Form 2 has a 250mW laser guided by custom galvanometers that produce a better, smoother finish to prints. The Form 2 has a build volume of 145 x 145 x 175mm, a heated resin tank, and a sliding peel and wiper mechanisms that allow a gentle removal and resetting of parts during printing.

Form Wash and Cure
Print Post-processing
Form Wash automates the print washing process for consistent, thorough, no-mess cleaning. Form Cure precisely combines temperature and 405 nm light to post-cure parts for peak performance.

GlobalMAX 1508
Abrasive Waterjet Cutter
The GlobalMAX 1508 is a compact, value-focused yet powerful abrasive waterjet with a cutting bed of 2’7” x 5’0” that cuts virtually any material. The software, developed specifically for abrasive waterjets, makes it easy to program and easy to use.

Paragon Xpress-E-14
Ceramic Firing Kiln
The Xpress-E-14A enameling kiln fires to 2000°F — ideal for enameling, ceramics, china painting, glass art and jewelry. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller.

WEN 3962
Two-Speed Band Saw
This bandsaw has a 3.5-amp motor and a 9-3/4 inch throat which allows it to cut up to six inches deep and 9-3/4 inches wide. The spacious worktable measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees.

WEN 4214
Variable Speed Drill Press
This bench-top, cast iron drill press has a variable speed feature (infinitely from 580-3200 RPM) and a LED powered speed readout. The 5/8” chuck with MT2 spindle taper provides versatility with a variety of bits and a 45° left and right beveling worktable.

Sper 100004
Ultrasonic Cleaner
The High Power Ultrasonic Cleaner generates thousands of minute cleansing bubbles which vibrate at a very high frequency. When the vibration speed rises above the ultrasonic frequency level, bubbles explode and generate strong power, cleaning the surfaces and cavities of hard-to-clean objects. Ultrasonic cleaning does not scratch the surface or harm objects like many chemical or abrasive cleansers.